Please use this identifier to cite or link to this item: https://er.nau.edu.ua/handle/NAU/36124
Full metadata record
DC FieldValueLanguage
dc.contributor.authorГуменюк, Ігор Анатолійович-
dc.date.accessioned2018-09-20T08:30:14Z-
dc.date.available2018-09-20T08:30:14Z-
dc.date.issued2018-09-
dc.identifier.citationГуменюк І. А. Триботехнічні властивості сталі 12Х18Н10Т, поверхнево модифікованої комбінованими покриттями : дис. канд. техн. наук : 05.02.04 / Гуменюк І. А. – Київ, 2018. – 201 с.uk_UA
dc.identifier.urihttp://er.nau.edu.ua/handle/NAU/36124-
dc.description.abstractГуменюк І.А. Триботехнічні властивості сталі 12Х18Н10Т, поверхнево модифікованої комбінованими покриттями. – На правах рукопису. Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю: 05.02.04 – тертя та зношування в машинах (13 – Механічна інженерія). Національний авіаційний університет, МОН України, Київ, 2018. Дисертаційна робота присвячена вирішенню актуального науково-технічного завдання підвищення зносостійкості поверхневих шарів корозійностійкої сталі 12Х18Н10Т шляхом формування зносостійких комбінованих дифузійних, електроіскрових та композиційних електролітичних покриттів дискретного і градієнтного типу та встановлення закономірностей впливу їх структурно-фазового складу, фізико-механічних властивостей і параметрів структури на триботехнічні характеристики. Дослідженні закономірності формування та механізми зношування багатокомпонентного хромоалітованого покриття в умовах тертя ковзання без змащення в залежності від хімічного і структурно-фазового складу. Представлено та описано результати експериментальних досліджень технологічного процесу азотування попередньо обробленої дискретно лазером сталі 12Х18Н10Т. Встановлено закономірності зношування від параметрів дискретної структури. Досліджено закономірності формування високотемпературним відпалом триботехнічних властивостей електроіскрових і композиційних електролітичних покриттів з евтектичним наповнювачем від ступеня нерівноважності структурно-фазових станів. Теоретично обґрунтовано та експериментально підтверджено вплив дифузійної перехідної зони між твердим наповнювачем і м’якою матрицею на напружено-деформований стан та зносостійкість композиційних електролітичних покриттів. На основі енергетичної моделі трибопроцесу виконано аналітичне дослідження умов утворення частинок зносу в процесі фрикційного руйнування приповерхневих шарів композиційного покриття. Застосовуючи енергетичний підхід до оцінювання зносостійкості поверхневих шарів за умов їх руйнування при терті розроблено технологічний процес формування на сталі 12Х18Н10Т градієнтного покриття з високою припрацьовуваністю і зносостійкістю. Проведено статистичний аналіз та побудовано регресійні моделі залежностей критеріїв оптимізації.uk_UA
dc.description.abstractGumenyuk I.A. Tribotechnical properties of steel 12C-18Cr-10Ni-Тi, surface-modified by combined coatings. – Manuscript. Thesis intended for getting scientific degree of Candidate of technical science by specialty: 05.02.04 – Friction and wear in machines (131 – Mechanical Engineering). National Aviation University, Ministry of Education and Science of Ukraine, Kyiv, 2018. The thesis is devoted to solving the actual scientific and technical task of increasing the wear resistance of surface layers of corrosion–resistant steel 12C-18Cr-10Ni-Тi by forming wear resistant combined diffusion, electrospray and composite electrolytic coatings of discrete and gradient type and establishing regularities of influence of their structural-phase composition, physical and mechanical properties and structural parameters on tribotechnical behavior. Investigation of regularities of formation and mechanisms of wear of multi-component chromoalluminized coating in conditions of dry sliding friction, depending on the chemical and structural-phase composition have been done. The results of experimental examinations of technological process of nitriding of selectively laser pre-treated steel 12C-18Cr-10Ni-Тi are presented and described. The regularities of wear on parameters of a discrete structure have been established. The regularities of formation of tribotechnical properties of electrospray and composite electrolytic coatings with eutectic filler by high-temperature annealing on the degree of nonequilibrim of structural-phase states were studied. The influence of the diffusion transition zone between the solid filler and the soft matrix on the stress-strain state and the wear resistance of composite electrolytic coatings was theoretically proved and experimentally confirmed. Based on the energy model of triboprocess, an analytical study of conditions for the formation of wear particles in the process of frictional destruction of near-surface layers of composite coating was carried out. Using the energy approach to evaluation of wear-resistance of surface layers in conditions of their fracture at friction, a technological process of forming gradient coating on the surface of 12C-18Cr-10Ni-Тi steel with high workability and wear resistance was developed. A statistical analysis was carried out. Regression models of dependencies of optimization criteria were constructed.uk_UA
dc.language.isoukuk_UA
dc.publisherНаціональний авіаційний університетuk_UA
dc.subjectсталь 12Х18Н10Тuk_UA
dc.subjectкомбіновані покриттяuk_UA
dc.subjectдискретні покриттяuk_UA
dc.subjectградієнтні покриттяuk_UA
dc.subjectзносостійкістьuk_UA
dc.subjectприпрацьовуваністьuk_UA
dc.subjectвторинні структуриuk_UA
dc.subjectнапружено-деформований станuk_UA
dc.subjectsteel 12C-18Cr-10Ni-Тi,uk_UA
dc.subjectcombined coatingsuk_UA
dc.subjectdiscrete coatingsuk_UA
dc.subjectgradient coatingsuk_UA
dc.subjectwear resistanceuk_UA
dc.subjectrunning-inuk_UA
dc.subjectfriction-induced structuresuk_UA
dc.subjectstress-strained stateuk_UA
dc.titleТриботехнічні властивості сталі 12Х18Н10Т, поверхнево модифікованої комбінованими покриттямиuk_UA
dc.title.alternativeTribotechnical properties of steel 12C-18Cr-10Ni-Тi, surface-modified by combined coatingsuk_UA
dc.title.alternativeТриботехнические свойства стали 12Х18Н10Т, поверхностно модифицированной комбинированными покрытиямиuk_UA
dc.typeThesisuk_UA
dc.subject.udc621.891-
Appears in Collections:Дисертації та автореферати кафедри прикладної механіки та інженерії матеріалів

Files in This Item:
File Description SizeFormat 
Автореферат Гуменюк І.А..pdf674.41 kBAdobe PDFView/Open
Дисертація Гуменюк І.А..pdf4.57 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.