DSpace Collection:https://er.nau.edu.ua/handle/NAU/499622024-03-28T10:36:43Z2024-03-28T10:36:43ZProcedure of editing existing polygonal models by SolidWorks systemRohozhyna, N.Samoilenko, IvanMeleshko, Kseniahttps://er.nau.edu.ua/handle/NAU/528292021-10-18T06:24:24Z2021-04-01T00:00:00ZTitle: Procedure of editing existing polygonal models by SolidWorks system
Authors: Rohozhyna, N.; Samoilenko, Ivan; Meleshko, Ksenia
Abstract: The ability to use 3D printing technology directly depends on the quality of the input geometric model. It is usually difficult to see small defects, missing triangles, convex and other deformations of the grid in slicers. There are online services stlfixers that fix network models. They quickly fill in defects, but are limited by the size and number of triangles of the model. In this case, slicers "do not see" the smallest holes in the grid or one / two triangles that protrude beyond the shape of the part, such defects are simply not printed, so in most cases stlfixers are quite enough.; Можливість використання технології 3D-друку безпосередньо залежить від якості вхідної геометричної моделі. Зазвичай важко побачити дрібні дефекти, відсутні трикутники, опуклі та інші деформації сітки в нарізках. Існують онлайн-сервіси stl-fixers, які виправляють моделі. Вони швидко заповнюють дефекти, але обмежені розміром і кількістю трикутників моделі. У цьому випадку слайсери "не бачать" найменших отворів у сітці або одного / двох трикутників, які виступають за форму деталі, такі дефекти просто не друкуються, тому в більшості випадків stlfixers цілком достатньо.
Description: 1. 2021 Best 3D Printer Slicer Software [Electronic resource]. - Access mode: https://all3dp.com/1/best-3d-slicer-software-3d-printer/2021-04-01T00:00:00ZPreparation of geometric data for 3D prototypingMomotenko, RuslanaTerzi, ArtemVlasenko, Yuryihttps://er.nau.edu.ua/handle/NAU/528272021-10-13T12:11:14Z2021-04-01T00:00:00ZTitle: Preparation of geometric data for 3D prototyping
Authors: Momotenko, Ruslana; Terzi, Artem; Vlasenko, Yuryi
Abstract: Despite the presence of high-tech CAD/CAM/CAE-systems, the problem of exchanging engineering data, primarily the structural elements of models, remains at this time not fully resolved. Both open data formats, such as STEP, IGES, etc., and polygonal STL formats, etc., do not solve the problem. Of course, these problems increase as the complexity of product models grows, but they also exist when using 3D prototyping technologies.; Незважаючи на наявність високотехнологічних CAD/CAM/CAE-систем, проблема обміну інженерними даними, насамперед структурними елементами моделей, залишається досі не повністю вирішеною. Як відкриті формати даних, такі як STEP, IGES тощо, так і багатокутні формати STL тощо, не вирішують проблему. Звичайно, ці проблеми зростають із зростанням складності моделей продуктів, але вони також існують при використанні технологій 3D-прототипування.
Description: 1. Kasik D.J., Buxton W., Ferguson D.R. Ten cad challenges // IEEE Computer Graphics and Applications. 2005. (25). C. 81–92.
2. NURBS-based and parametric-based shape optimization with differentiated CAD kernel // Computer-Aided Design and Applications. 2018. № 6 (15).
3. STL, 3D Manufacturing Format, and Additive Manufacturing File Export Options [Electronic resource]. - Access mode: http://help.solidworks.com/2018/english/SolidWorks/ sldworks/HIDD_STL.htm2021-04-01T00:00:00ZAcceleration the aircraft refueling speed using the new conductive sealing materialsZavgorodia, Sofiahttps://er.nau.edu.ua/handle/NAU/528262021-10-13T11:52:06Z2021-04-01T00:00:00ZTitle: Acceleration the aircraft refueling speed using the new conductive sealing materials
Authors: Zavgorodia, Sofia
Abstract: The static electricity is the most crucial hazard of the big volumes of fuel transfer from one custody into another. So its research will be urgent either in civil aviation or in military aircraft operation.; Статична електрика є найважливішою небезпекою при перекачуванні великого обсягу палива з однієї ємності зберігання в іншу. Тому таке дослідження є актуальним як в цивільній, так і у військовій авіації.
Description: 1. Zavgorodnia S. A. Upgrading the aircraft refueling speed using the new conductive sealing materials. / " POLIT.Challenges of science today,. Тези доповідей ХX міжнародної науково-практичної конференції молодих учених і студентів. 1-3 April 2020. - K .: 2020. - C. 36-37.
2. EN 12312-5:2005+A1:2009: Aircraft ground support equipment - Specific requirements – Part 5: Aircraft fuelling equipment. . – CEN: 2009, – 40 p.2021-04-01T00:00:00ZAnalysis of the efficiency of a gas turbine unit with two-stage compressionPikul, MarinaOtroshchenko, Volodymyrhttps://er.nau.edu.ua/handle/NAU/527902021-10-07T06:37:20Z2021-04-01T00:00:00ZTitle: Analysis of the efficiency of a gas turbine unit with two-stage compression
Authors: Pikul, Marina; Otroshchenko, Volodymyr
Abstract: A promising direction in the development of the power engineering is the use of energy-saving technologies based on gas turbine units, which can significantly increase the efficiency of using fossil fuel. In a number of cases, the operation of a gas turbine unit is carried out at modes below the optimum in terms of efficiency. Therefore, the economic efficiency of the unit is of great interest. During the last years, gas turbine efficiencies were successfully improved by raising the compressor pressure ratio and the turbine inlet temperature. The challenge of constantly improving the gas turbine efficiency by these methods has reached a critical moment, raising of the compressor pressure ratio and the turbine inlet temperature ran up to the limit. A high level of these parameters require the using of new expensive durable heat-resistant materials.; Перспективним напрямком у розвитку енергетики є використання енергозберігаючих технологій на базі газотурбінних установок, що дозволяє значно підвищити ефективність використання викопного палива. У ряді випадків робота газотурбінного агрегату здійснюється на режимах, нижчих за оптимальний з точки зору ККД. Тому його економічна ефективність становить великий інтерес. Протягом останніх років ефективність газових турбін була успішно покращена шляхом підвищення коефіцієнта тиску компресора та температури на вході турбіни. Завдання постійного підвищення ефективності газової турбіни за допомогою цих підходів досягло критичного моменту, коли коефіцієнт тиску компресора та температура на вході турбіни піднялися до граничних значень. Високий рівень цих параметрів вимагає використання нових дорогих міцних термостійких матеріалів.
Description: 1. Теория авиационных газотурбинных двигателей / Ю.М. Терещенко, Л.Г. Волянская, Н.С. Кулик, В.В. Панин - К.: Книжкове вид-во НАУ, 2005. – 500 c.
2. Моляков В.Д., Осипов М.И., Тумашев Р.З. Повышение эффективности режимов работы газотурбинного двигателя // Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2006. № 3. С. 80-95.2021-04-01T00:00:00Z